Troubleshooting – Sealey PC310 User Manual
Page 8
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and
Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling information.
13. TROUBLESHOOTING
Cleaner will not operate.
No power supply.
Faulty power cable, switch or motor.
Container full of liquid.
Check supply.
Check and repair or replace faulty item.
Empty container
Dust comes from the motor cover.
Filter missing or damaged.
Fit or replace dust filter.
Reduced efficiency and increased
Motor speed/vibration.
No solution spraying out.
Leak from drum connector
Filter clogged.
Nozzle, hose or container inlet blocked.
Switch in wrong position.
Shampoo tank is empty.
Incorrectly fitted trigger or pipes.
O Ring on male connector damaged
Clean or replace filter.
Check nozzle, hose and container inlet for
blockage.
Turn switch to the required position.
Add more shampoo.
Check fittings and connections. Ensure there
are no
Kinks in tubes
Replace O Ring.
Sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
Original Language Version
© Jack Sealey Limited
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone
01284 757500.
PC310 Issue:7(S) - 27/05/15