Sealey S01000 - Manual (Page 4)

noTe: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
01284 757500
01284 703534 [email protected]
www.sealey.co.uk
Web
The Siegen Tool Company,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, IP32 7AR
7. SHADE GUIDE & MARKINGS
Original Language Version
S01000 Issue No.1 10/01/13
Problem Cause Solution
Irregular darkening or
dimming.
The headband may have been unevenly set on the two
sides of the helmet (unequal distances from the eyes to
the shade cartridge).
Readjust the distance of the
shade cartridge.
Shade cartridge does
not darken or flickers.
The sensors are soiled or obstructed. Clean.
Front cover lens oiled or damaged. Clean or replace.
Welding current too low. Adjust weld amps.
Poor vision. Operative lenses and/or shade cartridge soiled. Check, clean or replace.
Insufficient background lighting. Adjust light.
Slow response. Operating temperature too low. Do not use at temperatures
below -10oC (14oF).
Welding helmet slips. Headband adjustments incorrect. Refer to section 4.
6. PROBLEM SOLVING
CURRENT (AMPERES)
WELDING
PROCESS
0.5 2.5 10 20 40 60 125 175 225 275 350 450
1.0 5.0 15 30 50 100 150 200 250 300 400 500
Covered Electrode Shade 9 S10 Shade 11 Shade 12 Shade 13 S14
MIG Plate Welding Shade 10 Shade 11 Shade 12 Shade 13 S14
MIG Sheet
Welding
Shade 10 Shade 11 Shade 12 S13 S14 S15
TIG Shade 9 S10 Shade 11 S12 Shade 13 Shade 14
MAG Shade 10 S11 S12 Shade 13 S14 S15
Arc Gouging Shade 10 S11 S12 S13 S14 S15
Plasma Cutting Shade 11 Shade 12 Shade 13
Plasma Welding 4 5 6 7 8 9 10 11 S12 Shade 13 Shade 14 S15
Meaning of the markings on the filter:
4 9 13 SEALEY 1 3 1 379
Light state
scale no.
Lightest dark
state scale
no.
Darkest
state scale
no.
Manufacturers
identification.
Optical class. Diffusion of
light class.
Variation in
luminence
transmittance
class.
Number of
the applied
standard.
© Jack Sealey Limited
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken
to a recycling centre and disposed of in a manner which is compatable with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste
authority for recycling information.