Event electronic S100 - Manual (Page 3)

• Muting the S100 output. Plug the included 1/4” footswitch into the On/Mute
footswitch jack. Depressing the switch once will mute the output from the S100.
Pressing it again will restore output. Note that the mute function applies only to audio
generated by the S100. The audio that appears at the Pass-Thru jacks is unaffected
by the mute operation.
Care and Maintenance
Your S100 Active Low Frequency Monitor is simple to care for and maintain. The
cabinet is finished with a durable vinyl laminate that can be cleaned with a soft
damp cloth. Avoid touching the exposed speaker element. Do not expose the rear
panel controls, connectors, or the speaker element to moisture or chemicals. Do not
expose the unit to dripping or splashing liquids; objects filled with liquids should not
be placed on the unit.
The fuse is housed in the powder connector which is replaceable by the user.
Contacting Customer Service
If you experience any trouble with your S100 Active Low Frequency Monitor, please
call the Event Electronics Customer Service department at 805-566-7777, ext.
5. Before calling, however, we ask that you please consult the Technical Support
section of our Web site: www.event1.com
If you believe that your S100 Active Low Frequency Monitor is in need of repair,
please contact the Event Electronics Customer Service department to request a
Return Authorization Number (RA#). We can accept for servicing only those units
that are accompanied by an RA#. Units shipped without an RA# number will be
refused.
2