Echo SRM-2400SB - Manual (Page 9)

P
ower
e
dger
A
ttAchment
o
PerAtor
'
s
m
AnuAl
9
4. Loosen adjustment knob and adjust the blade's depth of cut to
produce a fine cut between sidewalk and grass using a minimum
blade depth, usually with about 13 mm (1/2 in.) of the blade into the
ground. Tighten adjustment knob.
5. Before edging, plan your direction of travel so that the unit will al-
ways be positioned on your right side and so that you walk on a hard
surface whenever possible.
6. Hold edger as shown.
WARNING
Before edging, be sure to read and understand the entire Operator's
Manual to avoid the chance of serious injury.
7. When starting to edge, run the engine at full throttle, and lower the
blade gently into the ground, being careful not to hit the concrete
with the blade.
8. Don't force the blade. Only move forward as the blade will allow.
WARNING
The complete unit, specifically the drive shaft assembly and muffler
exhaust area may become very hot during use. Avoid contact during
and immediately after operation, otherwise serious personal injury
may result.
1/2 in.
INCREASE
DEPTH
WHEEL
ADJUSTMENT
KNOB
DECREASE
DEPTH
WARNING
Never adjust blade height with engine running, otherwise serious
personal injury may result.
m
aInTenanCe
Your ECHO unit is designed to provide many hours of trouble-free service. Regular scheduled maintenance will help
your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have
the ECHO Dealer do it, each maintenance task has been graded. If a task is not listed, see your ECHO Dealer for repairs.
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service.
Wear gloves to protect hands from sharp edges and hot surfaces.