Echo SRM-2400SB - Manual (Page 10)

10
blade replaCemenT
/
lubrICaTIon
Level 1.
Parts Required: POWER BLENDX TM 8 oz. or Lithium Base Grease,
Blade P/N 69601552632, split pin P/N 90030020022
Gear Case
NOTE
Grease gear case every 15 - 25 hours of use. Replace blade when it
is worn shorter than 6 in. Remove blade and holders before greasing
to prevent damage to gear and bearings.
1. Shut engine off.
2. Remove split pin (A).
3. Rotate blade until holes in inner blade adapter (B) and gear box
align. Insert locking tool to lock PTO shaft (C).
NOTE
Blade nut (D) is left hand thread.
4. Remove blade nut (D) in a clockwise direction using scrench. Re-
move outer blade adapter (E), blade (F) and inner blade adapter (B).
skIll level
Level 1 = Easy to do. Common tools may be required.
Level 2 = Moderate difficulty. Some specialized tools may be required.
maInTenanCe InTervals
B
C
E
F
A
D
Component Maintenance Procedure Skill Level Interval
Drive Shaft Grease 1 Every 25 hours of use [1]
Gear Housing Grease 1 Every 15-25 hours of use [1]
Screws/Nuts/Bolts Inspect/Tighten/Replace 1 Before Each Use
IMPORTANT - Time intervals shown are maximum. Actual use and your experience will determine the frequency
of required maintenance.
[1] Apply POWER BLENDX
TM Grease.