Emerson Radio NR303TT - Manual (Page 13)

12
PLAYING CASSETTE TAPES
Note: Before inserting a tape in the player be sure that there is no excess
slack in the cassette that could become jammed in the mechanism.
Refer to the CARE AND MAINTENANCE section for instructions on removing
excess slack from the cassette.
1.) Rotate the OFF-VOLUME control clockwise until a ‘click’ is heard and set the
Volume to a low level. The POWER indicator comes ‘on’.
2.) Set the Function selector (AM/FM/TAPE/CD/PHONO) to the TAPE position.
3.) Insert your cassette into the slot located on right side cabinet, as shown in the
illustration, with the side you wish to play facing ‘up’ and the open end on the
right side.
4.) Cassette playback begins as soon as the tape is inserted. Adjust the OFF-
VOLUME control to the desired level.
5.) To advance the tape rapidly, depress the EJ/FF (Eject/Fast Forward)
button approximately half way. The tape will move forward rapidly
as long as the button is depressed. Normal playback will resume
when the button is released.
6.) When the tape ends the player stops automatically. Depress the
EJ/FF (Eject/Fast Forward) button completely to remove the
cassette from the player. You may press the EJ/FF (Eject/Fast
Forward) button to stop playback and remove the cassette at any
time.
7.) To turn the system ‘off’, rotate the OFF-VOLUME control counter clockwise
until a ‘click’ is heard. The POWER indicator goes ‘off’.
E J
/
F.F
E J
/
F.F
Cassette Tape
Open End
NR303TT_050704.p65 7/5/2004, 10:14 12