Something not working – Electrolux ECN 1050 User Manual
Page 8

8
SOMETHING NOT WORKING
IF YOUR FREEZER DOES NOT
FUNCTION SATISFACTORILY
Check the following before calling for Service Force
agent:
If you are still unable to solve the problem, summon the
assistance of authorised service staff.
Do not take any other steps. Incorrect procedure may
cause personal injury or lead to additional defects.
It is quite normal for the freezer to seem warm on the
outside occasionally, owing to the heat generated by the
freezing process. This heat also helps to prevent the
formation of moisture on the outside of the appliance
which could cause rust.
If the freezer has been switched off briefly, the
compressor may not start immediately when the current
is re-connected. This is quite normal.
Defect:
Freezer not
cold enough
Too much frost
formed
Check if:
Temperature of stored
foods increases
(becomes hotter)
Lid does not close
completely
Lot of moisture in the
room
Goods packed poorly
Possible cause:
Plug not connected correctly
Defect in switch or fuse
Power failure
Thermostat set too warm
Lot of frost and ice formed
Lid in contact with goods in freezer
Moisture from washing machine,
tumble-dryer, etc.
Lot of moisture from goods
Action:
Check plug and socket
Check fuse, call electrician
Wait until current returns
Set thermostat colder
Defrost freezer
Re-arrange goods, check that lid closes
correctly
Move freezer to a room with less
moisture, or air regularly
Re-pack goods, see under “How to
use”