Attachment cleaning, Attachment door – Eureka 7600 User Manual
Page 7
7
POWER
3
Notch
Release
Button
1. Remove quick connect hose.
2. Open and hold the attachment door.
3. Push hose converter into attachment door (be sure
notch in the converter is toward back of cleaner).
To remove converter, push button on back of converter
and lift to remove. Place into back of cleaner.
Attachment Cleaning
Note: The revolving brush roll does not stop turning when using the attachment tools. Place the handle in the
upright position. Do not place cleaner on furniture or steps as the brush roll may cause damage.
Attachment Door
The attachment door allows a quick conversion from floor to attachment tool cleaning. The quick connect hose has a notch
in the converter that diverts the air suction from the brush roll area to the hose and attachments.
HO
W
T
O
USE
2
1