Pr oblem sol ving guide, Problem solving, Problem cause solution – Eureka 7600 User Manual
Page 12
Motor will not start.
Ⅺ
Electric Plug
Ⅺ
Push plug securely into outlet.
Ⅺ
Try another outlet.
Ⅺ
Check circuit breaker.
Does not clean the
Ⅺ
Disposable Dust Bag
Ⅺ
Change the bag. Hint: If picking up fine dust, the bag may
carpet.
not look full but a fine substance tends to reduce suction
when it blocks the airflow through the paper bag.
Ⅺ
Belt
Ⅺ
Replace a cut, loose or out of shape belt.
Ⅺ
Brush Roll
Ⅺ
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
Ⅺ
Hose
Ⅺ
Remove any clogs from the hose that restrict the airflow.
No suction at the
Ⅺ
Hose Converter
Ⅺ
Hose converter has to seat inside the attachment door.
end of the hose.
Ⅺ
Hint: Place converter notch to the back of the cleaner.
Ⅺ
Disposable Dust Bag
Change the bag. Hint: If picking up fine dust, the bag may
not look full, but a fine substance tends to reduce suction
when it blocks the airflow through the paper bag.
Ⅺ
Hose
Ⅺ
Remove any clogs from the hose that restrict the airflow.
Check both ends of the hose.
Ⅺ
Attachment Door or
Ⅺ
Remove bottom plate and clean debris from the
Hose Connection on
attachment door area or around the hose connection.
Base.
Motor suddenly
Ⅺ
Thermal Cut-Off
Ⅺ
Refer to page 5.
shuts off.
Headlight not
Ⅺ
Light Bulb
Ⅺ
Replace light bulb.
working.
Noise from the
Ⅺ
Brush Roll
Ⅺ
Remove bottom plate and clean debris from the brush
brush roll area.
roll area.
Ⅺ
Belt
Ⅺ
Replace a cut, loose or out of shape belt.
Cleaner is hard
Ⅺ
Cleaner Height Setting
Ⅺ
Turn adjustment knob to a higher position. Hint: Put handle
to push.
in operating position. Tilt the cleaner back to raise the
front wheels off floor Then turn the knob.
Ⅺ
Belt
Ⅺ
Replace cut, loose or out of shape belt.
Brush roll will not
Ⅺ
Belt
Ⅺ
Replace cut, loose or out of shape belt.
turn.
Burning smell.
Ⅺ
Belt
Ⅺ
Replace cut, loose or out of shape belt.
Cleaning height
Ⅺ
Cleaner Height Setting
Ⅺ
Hint: Put handle in operating position. Tilt the cleaner back
knob will not turn.
to raise the front wheels off floor. Then turn the knob.
Missing parts
Ⅺ
Call 1-800-438-7352 between 8:00 am and 4:45 pm
cental standard time, Monday through Friday. Know the
model and serial numbers when you call.
Questions?
Ⅺ
Call 1-800-282-2886, 7 am to 8 pm, central standard
time, Monday through Saturday. Know the model and
serial numbers when you call.
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
✓
12
✓
✓
✓
✓
✓
✓
✓
PR
OBLEM SOL
VING
Guide
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓