Eagle Electronics SeaFinder 480DF - Manual (Page 35)

29
place against the side of the hole. Finally, fasten the bracket to the
dash. Attach the unit to the gimbal bracket using the supplied gimbal
knobs and washers.
In-Dash Installation
You can mount the unit in the dash with an optional FM-5 In-Dash
Adapter Kit. The kit includes mounting hardware, a template for
cutting the hole and an instruction sheet, part 988-0147-43.
In-dash mounting template for the sonar unit, showing
dimensions. NOTE: The figure above is
not printed to scale. A scaled
template (FM-5 In-Dash Adapter Kit instructions) is available for free
download from our web site, www.eaglesonar.com.
Portable Installation
Like many Eagle products, this sonar unit is capable of portable
operation by using the optional PPP-13 portable power pack. The power
pack and an optional portable transducer expand the uses for your
sonar unit. The PPP-13 makes it easy to use the unit on your boat or
take it to the dock, on a float tube, on an ice fishing trip or use it as a
second sonar in a friend's boat.
113.5
[4.46]
Millimeters
[Inches]
ALWAYS VERIFY DIMENSIONS
In-Dash
Template
R 7.9
[0.31]
146.5
[5.76]
Top