Adjusting rinse aid dosing – Electrolux 40740 User Manual

Page 15

Text mode
Original mode

Operating Instructions

Adjusting Rinse Aid Dosing

As the dishes are washed rinse aid is released from the dispenser into
the wash water. The dose is factory set at 4, and can be adjusted from
1 to 6. Only change the setting if streaks, milky spots or dried on water
marks are visible on glasses or crockery.

1. Open the door of the dishwasher.

2. Press the rinse aid compartment

release button with your finger.

3. Fully open the rinse aid compartment

lid.

4. Set the dose level.

5. Close the lid and press until it locks

into place.

6. If rinse aid has spilt, wipe up with a

cloth.

In Daily Use

• Check the salt and rinse aid levels.

• Load cutlery and dishes into the dishwasher

• Fill with dishwasher detergent

• Select a wash programme suitable for the cutlery and dishes

• Start the wash programme