Troubleshooting – Melinera LED Christmas Tree Lights User Manual

Page 17

You can switch back and forth between constant light
and fl icker mode at any time.

• The OFF button is used to switch off the candles.

Please note:

• If individual candles cannot be switched on, switched

over or switched off directly, check the alignment of the
candles and the remote control: To ensure perfect oper-
ation, it is important that there is ‘visual contact’ between
all candles and the remote control. If necessary, you
should therefore rearrange the candles in the tree and / or
choose a different location from which you can control the
candles with the remote control. Be aware of the range of
the remote control. This is around 5 m. Then press the ON
or OFF button again. Note the different length of time for
which you need to press the ON button, depending on
what lighting mode you want (see above).

• If individual candles still cannot be switched on, check

the fi t of the candles on the clips: The candles must not
be screwed too tightly onto the clips. Turn the candles
roughly a quarter turn anticlockwise and then try to
switch the candles on again.

• If you subsequently buy more candles / sets of candles, all

candles can be controlled using just one remote control.

Troubleshooting

If (individual) candles do not respond to the remote control,
please check the following:
• Are batteries inserted into the candles and the remote

control?

• Are the batteries too weak or incorrectly inserted?
• Are the candles within the range of the remote control? / Is

there ‘visual contact’ between the candles and the remote

03175_DE-GB-FR-NL-RO_V0.indb 17

18.07.2014 13:54:44