Melinera Z30171-BS - Manual (Page 9)

9 GB/IE/CY
Insert the plug on the end of the light set into the socket of the
mains adapter 3 . Secure the connection by pushing the
clamping nut on the lead over the plug and screwing it on to
the mains adapter
3 .
Insert the mains adapter 3 into the mains socket. The light set
is now switched on.
Pull the mains adapter 3 out of the mains socket to switch off
the light set.
Note: The bulbs are connected in series. If one bulb is defective,
then all the bulbs of one wire may not light up.
Cleaning and care
CAUTION! RISK OF ELECTRIC SHOCK! First remove the
mains adapter 3 from the socket.
CAUTION! RISK OF ELECTRIC SHOCK! For reasons of
electrical safety the device must never be cleaned with water
or other liquids or immersed in water.
Do not use any solvents, petrol or similar items. This would
damage the device.
Only a dry, lint-free cloth should be used for cleaning.
Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details of
how to dispose of your worn-out product.