Melinera Z30171-BS - Manual (Page 8)

8 GB/IE/CY
Protect the mains cable from sharp edges, mechanical loads
and hot surfaces.
Do not install with sharp fasteners or nails.
Always unplug the mains adapter
3 from the socket before
installation, dismantling or cleaning.
Never touch the light chain plug or the light chain itself with
wet hands.
The string lights must not be electrically connected to another
set of lights.
This product is intended for use outdoors but should be
plugged into a socket which is located in an indoor location
(e.g. a shed, garage or porch).
The socket into which this product is plugged must be pro-
tected by a residual current circuit breaker (RCD) with a trip
current not greater than 30mA.
Sockets positioned outdoors for use with this product should
be of a type which is adequately water proof for an outdoor
location and should be located at least 2.5m from the nearest
body of water or any location where water may collect.
If in any doubt about the safe installation or use of this product,
please consult a qualified electrician.
Use
Note: The light set has 6 parallel wires, each with five small light
stars
2 and one large light star 1 . The distance between the
wires is approx. 16 cm.
Mount the small light stars 2 on to the sockets of the bulbs.
Use the supplied suction cups 4 to hang up the light set.