Florabest FBC 7 B2 - Manual (Page 65)

GB
MT
58 FBC 7 B2
General instructions
■ Activate programming mode by pressing the M button 5 . You can either make all the settings one
after the other or switch between the following setting options by pressing the M button 5 :
― System time
― Irrigation start time 1
― Irrigation duration 1
― Irrigation start time 2
― Irrigation duration 2
― Irrigation interval
― Standby (Programming mode terminated and irrigation programme active).
■ After about 1 minute without any entries being made, the appliance returns to standby mode.
All values that have already been programmed are retained.
■ By briefl y pressing the button 8 you can jump back one step in the programming mode to make
adjustments to the programmed values. By pressing and holding the button 8 you can terminate
programming mode and the values that have already been programmed will be retained.
Cancel irrigation
♦ Press the 8 button stop irrigation that is already in progress.
Battery charge level
In the event of a low battery charge level, the symbol C fl ashes. All other displays are deactivated.
For as long as the symbol fl ashes, irrigation is not possible. Irrigation that may be in progress will be
terminated.
NOTE
► The programming is saved for 120 seconds. If battery replacement takes longer, the appliance
must be reprogrammed.
IB_103257_FBC7B2_LB5.indb 58 11.12.14 16:34