Florabest FBC 7 A1 - Manual (Page 95)

GB
MT
92 FBC 7 A1
Operation/Programming
In this chapter you will receive important information about the
operation and programming of the appliance.
General information
■ By pressing the button M 3 you activate the programming
mode. You can either carry out all settings in succession or,
by repeatedly pressing the button M
3 , switch between the
following setting options:
― System time (actual time/weekday)
― Water fl ow in %
― Time for the next watering
― Duration of the watering
― Watering interval
― Standby (Programming mode terminated and watering
programme active).
■ After about 1 minute without input the appliance returns to
standby mode.All values already programmed are retained.
■ By pressing the button ON/OFF 5 the programming mode can
be terminated at any time. All values already programmed are
retained.
Programming the appliance
System time ( A )
♦ Press the button M 3 once. The hour indicator and the clock
symbol blink.
♦ Using the rotary knob 2 enter in the required value and press
the button 4 . The minute indicator and the clock symbol
blink.
IB_93784_FBC7A1_LB5.indb 92 IB_93784_FBC7A1_LB5.indb 92 16.12.13 16:03 16.12.13 16:03