Florabest FKS 2200 B1 - Manual (Page 10)

10
GB
tery.pack.from.the.power.tool.
before.making.any.adjust-
ments,.changing.accessories,.or.
storing.power.tools. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
• Store.idle.power.tools.out.of.the.
reach.of.children.and.do.not.al-
low.persons.unfamiliar.with.the.
power.tool.or.these.instructions.
to.operate.the.power.tool. Power
tools are dangerous in the hands of
untrained users.
• Maintain.power.tools..Check.
for.misalignment.or.binding.
of.moving.parts,.breakage.of.
parts.and.any.other.condition.
that.may.affect.the.power.tool’s.
operation..If.damaged,.have.
the.power.tool.repaired.before.
use. Many accidents are caused by
poorly maintained power tools.
• Keep.cutting.tools.sharp.and.
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
• Use.the.power.tool,.accessories.
and.tool.bits.etc..in.accordance.
with.these.instructions,.taking.
into.account.the.working.condi-
tions.and.the.work.to.be.per-
formed..Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
Service.
• Have.your.power.tool.serviced.
by.a.qualified.repair.person.us-
ing.only.identical.replacement.
parts. This will ensure that the safety
of the power tool is maintained.
• Wear.personal.protective.equip-
ment.and.always.wear.safety.
glasses..Wearing personal protective
equipment such as nonslip safety boots,
cut protection trousers, a hard hat or ear
protection reduces the risk of injuries.
• Prevent.unintentional.starting..
Ensure.the.switch.is.in.the.off-
position.before.connecting.to.
power.source.and/or.battery.
pack,.picking.up.or.carrying.
the.tool. Carrying power tools with
your finger on the switch or energising
power tools that have the switch on
invites accidents.
• Remove.any.adjusting.key.or.
wrench.before.turning.the.pow-
er.tool.on. A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
• Do.not.overreach..Keep.proper.
footing.and.balance.at.all.times..
This enables better control of the pow-
er tool in unexpected situations.
• Keep.your.hair,.clothing.and.
gloves.away.from.moving.parts..
Jewellery or long hair can be caught in
moving parts.
Power.tool.use.and.care.
• Do.not.force.the.power.tool..Use.
the.correct.power.tool.for.your.
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
• Do.not.use.the.power.tool.if.the.
switch.does.not.turn.it.on.and.
off. Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
• Disconnect.the.plug.from.the.
power.source.and/or.the.bat-