Emerson Radio SB250A - Manual (Page 18)

1 7
6.) When the program is completed the player stops and the display again shows
the total tracks on the disc. The PROG indicator goes ‘Off’ but the program
sequence remains in the memory.
To repeat the program press the PROGRAM button and then press the PLAY/
PAUSE button.
To cancel the program from the memory, press the STOP button at
programming mode.
Programmed Repeat Playback
You may use the Programmed Playback and Repeat features together to
continuously repeat a programmed sequence.
First program the desired sequence according to steps 1 through 5 on page 16.
When Programmed Playback begins press the REPEAT button twice to select the
Repeat All Tracks mode.
The REPEAT indicator and the PROG indicator light up. The programmed sequence
will be repeated continuously.
PHONES Jack
The Stereo Headphone Jack is located on the back cabinet. Connect a set of
stereo headphones (not included) to this jack for private listening without disturbing
others.
The internal speakers are automatically disconnected when headphones are
connected to the PHONES jack.
IMPORTANT: When using headphones always set the volume control to a
low level before you put the headphones on. Then put the headphones on and
gradually increase the volume to a comfortable listening level.
SB250A_011205.p65 12/1/2005, 17:25 17