Emerson Radio SB250A - Manual (Page 17)

1 6
Programmed Playback
Use the Programmed Playback feature to play up to 32 tracks on a disc in any
desired order. You may also program a particular track to play several times within
a programmed sequence if desired.
Notes: You cannot program a disc while it is playing. Press the STOP button
to stop playback and then follow the programming steps below.
1.) Load your disc as usual and wait until the display shows the
total number of tracks on the disc.
2.) Press the PROGRAM button on the front panel. The PROG
indicator begins flashing and Program Memory number “01”
appears in the display.
3.) Press the or buttons to select the first track number
to be programmed. Example: Track number 07.
When the desired track number is flashing in the display press the PROGRAM
button again.
Track 07 is now entered in Program Memory number “01”.
The program memory number now advances to number
“02”.
4.) Repeat step 3, selecting a different track number each time until you have
entered up to 32 tracks in the program memory.
5.) When you have completed programming the desired tracks press the PLAY/
PAUSE button to begin programmed playback. The PROG indicator
remains ‘On’. Playback will begin on the first track you programmed and will
continue until the last programmed track has played.
SB250A_011205.p65 12/1/2005, 17:25 16