Florabest KH 4258 - Manual (Page 14)

Operation/Programming
GB
IE
12 KH 4258
Operation/Programming
In this chapter you will receive important information about the
operation and programming of the appliance.
General information
By pressing the button ■ M 3 you activate the programming
mode.You can either carry out all settings in succession or,
by repeatedly pressing the button M
3 , switch between the
following setting options:
System time (actual time/weekday) ―
Water fl ow in % ―
Time for the next watering ―
Duration of the watering ―
Watering interval ―
Standby (Programming mode terminated and watering ―
programme active).
After about 1 minute without input the appliance returns to ■
standby mode.All values already programmed are retained.
By pressing the button ■ ON/OFF 5 the programming mode can
be terminated at any time. All values already programmed are
retained.
Programming the appliance
System time ( A )
Press the button ♦ M 3 once. The hour indicator and the clock
symbol blink.
Using the rotary knob ♦ 2 enter in the required value and press
the button 4 . The minute indicator and the clock symbol
blink.