Echo 99944200532 User Manual

Page 8

esCrIpTIon

Locate this safety decal on your attachment. Make sure the decal is legible and that you understand and follow the

instructions on it. If it cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING

instructions for specific information.

1. GRIP, FRONT - Cushioned grip for left hand.

2. ShAFT DECAL - Contain important safety information that must be followed.

3. LOWER DRIVE ShAFT ASSEMBLy - Contains a specially designed liner and the flexible drive shaft.

4. CUTTING ATTAChMENT - Sealed, gear ratio is 1.5:1 reduction.

5. AUTOMATIC OILER ASSEMBLy - Self oiling. Use high quality, low viscosity, non detergent bar and chain oil.

6. SAW ChAIN - Chain, serving as a cutting tool.

7. GUIDE BAR - 254 mm (10 inch) Bar

8. CUTTING ShOE - Used to capture and stabilize branch while cutting. Place cutting shoe against branch, accelerate

and lower saw chain into branch.

9. GUIDE BAR COVER - Used to cover guide bar and saw chain during transport and storage. Remove guide bar

cover before using unit.