Echo 99944200532 User Manual
Page 13

P
ower
P
runer
TM
A
TTAchMenT
o
PerATor
'
s
M
AnuAl
13
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service.
Wear gloves to protect hands from sharp edges and hot surfaces.
m
aInTenanCe
Your ECHO Pruner attachment is designed to provide many hours of trouble free service. Regular scheduled mainte-
nance will help your Pruner attachment achieve that goal. If you are unsure or are not equipped with the necessary tools,
you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to
DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see
your ECHO Dealer for repairs.
skIll
levels
Level 1 = Easy to do. Common tools may be required.
Level 2 = Moderate difficulty. Some specialized tools may be required.
maInTenanCe
InTervals
Component
Maintenance Procedure
Skill Level
Interval
Drive Shaft
Grease
1
Every 25 hours of use (1)
Guide Bar
Inspect/Clean/Lubricate
2
Before Each Use
Saw Chain
Inspect/Sharpen/Replace/Tension
2
Before Each Use
Screws/Nuts/Bolts
Inspect/Tighten/Replace
1
Before Each Use
IMPORTANT - Time intervals shown are maximum. Actual use and your experience will determine the frequen-
cy of required maintenance.
[1] Apply POWER BLENDX
TM
Grease.
lubrICaTIon
Drive Shaft (Lower)
Level 1
Parts Required: POWER BLENDX
TM
8 oz. or Lithium Base Grease.
1. Remove cutting attachment locator screw (A).
2. Loosen two (2) bolts (B).
3. Remove cutting attachment assembly.
4. Remove flex cable, wipe clean and apply a thin coating (15 ml) of
high temperature grease.
5. Slide the flexible cable back in the drive housing. DO NOT get dirt
on the flex cable.
6. Install and secure cutting attachment assembly.
B
A