Kichler 300012 - Manual (Page 11)

10
Larissa
TM
Fig. 20
Fig. 21
IInstall 2, 3 volt (#2032) batteries included with
the CoolTouch
TM Control System. (Fig. 21)
Note: To prevent damage to the transmitter,
remove these batteries if not used for long
periods of time (months).
14. INSTALLING THE BATTERY
13. FAN WITHOUT LIGHT KIT (OPTIONAL)
1. Disassemble the switch housing from the
light kit, you can keep the light kit for future
use.
2. Attach the plastic plug to the switch
housing. (Fig. 20)
3. Install the switch housing to the mounting
plate with screws provided. (Fig. 20)
Mounting plate
Switch
housing
Plug
Screws