Kichler 300119 - Manual (Page 5)

4
Windham TM
Fig. 5
REMEMBER to turn off the power. Follow the
steps below to hang your fan properly:
Step 1. Attach the mounting plate to the outlet
box with two screws and washers provided
with the outlet box. Make sure the mounting
plate is tight and secured. (Fig. 4)
Step 2. Lift fan into position by hanging the
motor assembly onto the hook from the ceiling
mounting plate allowing it to hang freely. (Fig. 5)
Fig. 4
5. HANGING THE FAN
CUL Listed
electrial
box
Mounting plate
Motor
Fig. 6
6. INSTALLATION OF SAFETY SUPPORT
(for Canadian Installation ONLY)
Outlet box
An additional safety support is provided to
prevent the fan from falling fan). Place the end
of cable through the loop of ceiling support
cable. Pull as much cable through loop as
possible. Feed end of cable into clamp hole
and fi rmly tighten screw (Fig. 6). Cut off
excess safety cable. Secure the safety cable
to the ceiling joist with screw and washer.
Attach safety cable
to ceiling joist with
screw and washer