Al390kcl-339011 p9, Installing the switch housing – Kichler 339011 User Manual

Page 10

Text mode
Original mode

Fig. 18

Switch
housing

Wire connectors

Screws

Mounting plate

11. INSTALLING THE SWITCH HOUSING

Step 1. While holding the switch housing under
your ceiling fan, push the square wire
connectors together. One from the fan and one
from the switch housing.

NOTE: These connectors are color coded and
will ONLY engage when the colored strips are
matched (aligned).

Step 2. Carefully push all the wires into the
switch housing.

Attach the switch housing to the mounting
plate with the screws provided. Make sure
each screw is tight. (Fig. 18)