Kichler 300114 - Manual (Page 9)

8
Hendrick
TM
9. ATTACHING THE FAN BLADES
Fig. 16
Fig. 17
Step 1. Insert the blade through the blade slot
in the decorative housing. Align the holes in
blade and blade bracket, place the blade
support plate on blade as showing in Figure
16, making sure the holes are also aligned and
secure with screws provided.
Step 2. Repeat process with other blades.
10. INSTALLING THE MOUNTING PLATE
1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
2. Place the key holes on the mounting plate
over the 2 screws previously loosened from
the mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 17)
Screws
Blade
Slot
Blade support
plates
Mounting
plate
Mounting ring
Screws