Kichler 339013 - Manual (Page 12)

Fig. 19
Fig. 20
Fig. 21
Remove the battery compartment cover on
the back of the CoolTouch™ Transmitter and
insert both batteries provided. Make sure the
+ sign is facing up.
Take care during this procedure NOT TO
move the frequency dip switches inside this
compartment. The settings MUST remain the
same as the settings on the receiver for
proper communication with the control
system.
It's a good idea to remove these batteries if
your fan is not used for extend periods of
time, (months).
13. OPERATING INSTRUCTIONS
Restore power to ceiling fan and test for
proper operation.
A.
, , and buttons:
These three buttons are used to set the
fan speed as follows:
= High speed
= Medium speed
= Low speed
B. button:
This button turns the fan off.
C. The " " button:
If your fan is equipped with an optional
light fixture, this button turns the light
fixture On or Off. Press and release once
for either Off or On.
The control system is designed for use with
"Fluorescent Lamps" but can be used for
regular incandescent lamps however, it is
NOT designed to control dimming of the light
fixture.
This control system is NOT designed to
"Reverse" the rotation of the blades. to set
the fan blades in reverse, locate the reverse
slide switch located on the side of the Switch
Housing. See inset image at left.
12. INSTALLING THE BATTERIES
11
Slide switch