Kichler 339013 - Manual (Page 11)

Fig. 18
10
11. INSTALLING THE SWITCH HOUSING
Switch housing
Wire connectors
Screws
Mounting plate
Step 1. While holding the switch housing
under your ceiling fan, push the square wire
connectors together. One from the fan and
one from the switch housing.
NOTE: These connectors are color coded and
will ONLY engage when the colored strips are
matched (aligned).
Step 2. Carefully push all the wires into the
switch housing.
Attach the switch housing to the mounting
plate with the screws provided. Make sure
each screw is tight. (Fig. 18)
Monarch II TM