beautypg.com

Wake to radio, Wake to buzzer (crescendo alarm) – Emerson Radio CKS3030 User Manual

Page 14

background image

1 3

WAKE TO RADIO

1.) Turn the radio ‘On’ and select the band, station, and volume level that you wish

to hear when the alarm comes on, then turn the radio ‘Off’ again.

2.) Reconfirm the wake up time and alarm mode settings for the alarm you are

using, Alarm 1, Alarm 2, or both alarms.

3.) Set the ALM (Alarm) selector switch for one or both alarms to the ‘RADIO

position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm

that the alarms are set.

4.) At the selected wake up time the radio will turn ‘On’. It will play for one hour and

then shut off automatically.

5.) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2

button, or press the RADIO ON/OFF button. The radio will stop but the alarm

remains set and will turn the radio on again at the same time on the following

day (depending on the Alarm Mode setting).

6.) If you do not want the alarm to turn the radio on the following day, set the

appropriate ALM selector to the ‘OFF’ position.

WAKE TO BUZZER (CRESCENDO ALARM)

1.) Reconfirm the wake up time and alarm mode settings for the alarm you are

using, Alarm 1, Alarm 2, or both alarms.

2.) Set the ALM selector switch for one or both alarms to the BUZZER position.

The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the

alarms are set.

3.) At the selected wake up time the buzzer will sound. It will begin softly and

gradually increase in volume to wake you up. It will continue for one hour and

then shut off automatically.

4.) To stop the buzzer sooner, press either the appropriate ALARM 1 or ALARM

2 button. The buzzer will stop but the alarm remains set and will turn the buzzer

on again at the same time on the following day (depending on the Alarm Mode

setting). To stop the buzzer and turn on the radio immediately, press the RADIO

ON/OFF button instead of the ALARM 1 or ALARM 2 button.

5.) If you do not want the alarm to turn the buzzer on the following day, set the

appropriate ALM selector to the ‘OFF’ position.

CKS3030_ib072103.p65

21/7/2003, 15:49

13