Euro-Pro STEAM BLASTER EP95B - Manual (Page 5)

OPERATING INSTRUCTIONS cont. GETTING TO KNOW YOUR SHARK STEAM BLASTER
Steam On/Off
Switch
ON/OFF STEAM SWITCH
1. Before turning the steam switch to the
“On” position, wait until the “Steam
Ready” light located on the unit has
turned off.
2. Setting this switch to the “On” position will
start the flow of steam
.
CAUTION:
Upon initial use, the steam will be mixed with
water, hot enough to scald. Ensure that the
floor brush is resting on the floor or the hose
handgrip is directed away from user when
steam switch is turned on. Never direct the
nozzle or brush end of the unit toward yourself
or anyone near you.
CAUTION:
The “On/Off Steam Switch” located on the
handle must be in the “Off” position before
attaching or disassembling accessories.
Never leave the “Steam Switch” in the “On”
position when unit is not in use.
1
2
3
4
Glass & Tile Squeegee
This attachment is very useful for cleaning
large windows, plastic material, ceramic,
tiled surfaces, marble planes, etc.
Apply steam abundantly, rub with the
spongy side of squeegee and remove with
the glass wiping rubber located at the front
edge of squeegee. 1. Reservoir cover
2. On/Off Switch
3. Steam Ready Light (Green)
4. Pivoting Wheels
Technical Specifications
Voltage: 120V~ 60Hz.
Power: 1400 Watts
Water Capacity: 3 1/4 Cups (.8 L.)
Max. Steam Temp.: 240°F
Features
• On/Off Switch
• Thermostat & Safety
Thermofuse
• Steam Trigger on Handgrip
• Steam Ready Light
• 3 Pivoting Wheels
Detail Cleaning Attachment
This attachment is very useful for cleaning
surfaces that are difficult to reach. It is ideal for
radiators, door and window jambs, shutters and
sanitary fixtures. The following parts can be
applied to this attachment:
6 3