Preparing your ice maker for use – EdgeStar IP200 User Manual
Page 4
2
When using electrical appliances, basic safety precautions should be followed to reduce the
risk of fire, electric shock, and/or injury to persons or property. Read all instructions before
using any appliance.
z Do not operate this or any other appliance with a damaged cord.
Connect to properly polarized outlets only. No other appliance should be plugged into the
same outlet. Be sure that the plug is fully inserted into the receptacle.
z Do not run cord over carpeting or other heat insulators. Do not cover the cord. Keep cord
away from traffic areas, and do not submerge in water.
z We do not recommend the use of an extension cord, as it may overheat and become a
fire risk. If you must use an extension cord, use a cord of No.14 AWG minimum size and
rated for no less than 1875 watts.
z Unplug the ice maker before cleaning it or making repairs.
z Exercise caution and use reasonable supervision when appliance is used near children.
z Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or
explosion.
z Do not tip over.
z If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to
room temperature before plugging it in.
PREPARING YOUR ICE MAKER FOR USE
IMPORTANT SAFETY TIPS