Attach hose, Attach handle – Eureka 5739 User Manual
Page 7
7
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure on/off switch is in off (0) position before plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Attach Hose
From rear of cleaner, align handle with groove and
slide onto cleaner. If necessary, use thumb and finger
pressure to slide handle into position.
Attach handle with the two screws provided in the
assembly packet. Use a Phillips
®
head screwdriver.
NOTE: Hand tighten with screwdriver to be sure
both screws are firmly seated.
Groove
Groove
1
2
Pick up hose and lay across upper hose retainer.
Push the end of the hose in the lower hose retainer
to secure.
Upper
Hose
Retainer
3
4
Lower
Hose
Retainer
4
3
1
2
1
HO
W
T
O
A
SSEMBLE
Hose
Attach Handle
CAUTION: Do not catch cord under handle.