Eureka 5739 - Manual (Page 6)

6
Hose Retainers (4). Place hose in retainers to store hose on
unit.
Electrical Cord Hooks (2). Wrap electrical cord around them
to store electrical cord on unit. The upper cord hook rotates for
quick cord release.
Nested Wand Storage. The crevice wand stores inside the
larger wand.
Carrying Handle. Use this handle to carry unit from one place
to another.
Dusting/Upholstery Brush Storage. Store the dusting brush
on back of cleaner.
11
11
11
11
12
12
13
13
14
NOTE: WHEN UNIT IS RUNNING, DO NOT
ATTEMPT TO REMOVE ANY OBJECT
WHICH PREVENTS THE BRUSH ROLL
FROM TURNING.
First, turn off unit, unplug from the electrical
socket, then remove object from brush roll area.
As example: sock, rug, etc.
Thermal Cut Off
This cleaner has a special thermostat that protects the
cleaner in case of motor overheating. If the cleaner
suddenly turns off, follow this procedure:
1. Push rocker switch to off (O) position.
2. Unplug cleaner.
3. Check for source of overheating problem (i.e. full dust bag,
blocked hose, or clogged filter).
4. If a full dust bag, blocked hose or clogged filter is found,
change the dust bag, clear the hose or replace or clean the
filters.
5. Wait at least 30 minutes before attempting to reuse the
cleaner.
6. After 30 minute cool down period, plug the cleaner in and
push the rocker switch to the on (I) position. The cleaner
should turn on.
7. If the cleaner still does not operate, take it to any Eureka
Authorized Service Center for repair. Call 1-800-282-2886
for the nearest Eureka Authorized Service Center to you.
15
QUICK REFERENCE
11
12
13
14
15