EverFocus EDSR400M - Manual (Page 34)

MENU
Note: Alarm Connectors (DB-15)
PIN # NAME PIN # NAME
1 GND 9 GPIN 2
2 ALMIN 1 10 DISK-FULL
3 ALMIN 2 11 GPOUT 1
4 ALMIN 3 12 GPOUT 2
5 ALMIN 4 13 ALM NC
6 ALMRST 14 ALM NO
7 REC IN 15 ALM COM
8 GND
The alarm connector, figure 1, is used to provide one
sensor alarm input for each camera input.
For easy operation, an alarm extension board,
figure 2, is provided to connect to the alarm
connector.
Each alarm input requires two wires, one wire
connects to the desired alarm input pin, the
second wire connects to the multiplexer
ground. The alarm signal assignment is shown
at the following table, table 1.
9 15
1 8
PSR4D0060A8 7 6 5 4 3 2 1 9 10 11 12 13 14 15MENU(4)~(5) ALARM -1 TYPE:ALARM -2 TYPE:
ALARM -3 TYPE:
ALARM-4 TYPE:20There are two alarm types for all cameras.
One is normally open(N.O.) and the other setting is normally closed (N.C.).
Default setting: Normally open(N.O.) Pages: 1 … 32 33 34 35 36 … 72 wrong Brand wrong Model non readable See also other documents in the category EverFocus Car DVR: EDSR100M (62 pages) eDR400 (61 pages) RS232 (105 pages) 410M (84 pages) ECOR264-8F1 (128 pages) EDSR-600 (57 pages) EDSR400H (107 pages) EDSR-1600 (68 pages) EDR-1640 (83 pages) EDSR100H (55 pages) EDR810H (79 pages) HD-CCTV EPHD08 (142 pages) DVR Paragon264 (1 page) eDR1680 Series (55 pages) EMV400 (129 pages) 920 (162 pages) ENDEAVOR 22HH1144 (149 pages) EDR-1610A (83 pages) EDR810M (134 pages) Digital Video Recorder EDVR16D3 (2 pages) ECOR264-16X1 (147 pages) EDVR SERIES (148 pages) EDR-920 (162 pages) EDR920 (77 pages) EDR1600 (72 pages) EMV1200 (137 pages) DVR-100H (55 pages) EMV200 (102 pages) Sitemap
PSR4D0060A
8 7 6 5 4 3 2 1
9 10 11 12 13 14 15
MENU
(4)~(5) ALARM -1 TYPE:
ALARM -2 TYPE:
ALARM -3 TYPE:
ALARM-4 TYPE:
20
There are two alarm types for all cameras.
One is normally open(N.O.) and the other setting is normally closed (N.C.).
Default setting: Normally open(N.O.)