Electrolux TINSEB493MRR1 - Manual (Page 12)

E
12
Before Operating
Before operating your new Convection microwave •
Oven make sure you read and understand this
Use and Care Guide completely.
Before the Convection microwave Oven can be
•
used, follow these procedures:
Plug in the oven. Close the door. The oven display
1.
will show ENJOY YOUR OVEN TOUCH CLEAR
AND TOUCH CLOCK
.
Touch the 2. STOP/CLEAR pad. : will appear.
Set clock. See below. 3.
To set the clock
• Suppose you want to enter the correct time of day
12:30 (A.m. or P.m.).
Procedure
Step Touch
Touch 1. set clock.
Enter the correct time of 2.
day by touching the
numbers in sequence.
1 2
3 0
Touch 3. set clock again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the
display. Touch the
STOP/CLEAR pad and re-enter
the time.
• If the electrical power supply to your Convection
microwave Oven should be interrupted, the dis-
play will intermittently show ENJOY YOUR OVEN
TOUCH CLEAR AND TOUCH CLOCK after the
power is reinstated. If this occurs during cooking,
the program will be erased. The time of day will
also be erased. Simply touch
STOP/CLEAR pad
and reset the clock for the correct time of day.
NOTE
Your Convection microwave Oven can be pro-
grammed with the door open except for
START,
popcorn, fresh veggies, frozen veggies,
baked potato and sensor reheat.
Stop/Clear
Touch the STOP/CLEAR to:
Erase if you make a mistake during 1.
programming.
Cancel timer.
2.
Stop the oven temporarily during cooking. 3.
Return the time of day to the display. 4.
Cancel a program during cooking, touch twice. 5.