Electrolux LAVATHERM 58840 - Manual (Page 19)

Time
To select the programme duration after setting the TIME programme. You can select
a programme duration from 10 mins to 3 hrs in 10-minute steps.
1. Turn the programme knob to the TIME programme. The blinking 10' above TIME
button is on. (corresponding to the cooling phase).
2. Press the TIME button repeatedly un-
til the desired programme duration is
shown in the display, e.g. 20 for a
programme of 20 minutes.
If the programme duration is not selec-
ted, the duration is automatically set to
10 mins.
Setting delay start
With the DELAY START button, you can delay the start of a programme by
between 30 minutes (30') and a maximum of 20 hours (20h).
1. Select the programme and additional functions.
2. Press the DELAY START button as
many times as necessary until the re-
quired start delay appears on the dis-
play, e.g. 12h if the programme is to
be started in 12 hours.
If the display is showing 20h and you
press the button again, the time delay will be cancelled. The display will
show 0'and then the duration of the selected programme.
3. To activate the delay timer, press the START PAUSE button. The amount of time
remaining until the programme is set to start is continuously displayed (e.g.
15h, 14h, 13h, … 30' etc).
Setting child lock
The child lock can be set to prevent a programme being accidentally started or a
programme in operation being accidentally changed. The child lock function locks
Daily use 19