Electrolux WA GLE S7000 - Manual (Page 18)

Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed for about 2
seconds and the yellow Start/Pause light
start flashing.
Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for example
E20 (see paragraph «Something not
working»).
End of programme
When the programme has finished a
flashing zero is displayed, the «Door» pilot
light and the Start/Pause light go out and
the door can be opened.
Select the «Start/Pause»
To start the selected programme, press the Start/Pause button; the corresponding
red pilot light stops flashing.
The washing pilot light «Waschen/Lavage» is on to indicate that the appliance
starts operating.
The door pilot light «Tür/Porte» is on to indicate the door is locked.
To interrupt a programme which is running, depress the Start/Pause button: the
corresponding red pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the
Start/Pause button again.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the yellow pilot light of the Start/Pause button
flashes for 3 times the message Err is displayed for about 2 seconds.
18 Use
132962330_EN.qxd 10/06/2008 14.03 Pagina 18