Electrolux HD 8990 - Manual (Page 11)

11
Warning
• Failure to observe the instructions on cleaning the unit and changing the filters will
cause a fire hazard. You are therefore strongly recommended to follow these
instructions.
• The manufacturer declines all responsibility for any damage to the motor or any
fire damage linked to inappropriate maintenance or failure to observe the above
safety recommendations.
Changing the light bulb
• Disconnect the cooker hood from the mains supply.
• Remove the lamp cover carefully, use a screw driver as a lever. Fig. 6.
• Replace the old bulb with a new one of the same type.
• Refit the lamp cover.
• If the light does not come on, make sure the bulb has been inserted in correctly
before contacting your local Service Force Centre.
Fig. 6