Echo HC-185 - Manual (Page 23)

H
edge
C
lipper
23
O
peratOr
'
s
M
anual
sharpenIng blades
Level 2.
Parts required: None
WARNING
Hedge Clipper blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.
A
Gear Box Assembly
Level 1.
Parts required: POWER BLENDX TM 14 oz. or Lithium Based
Grease.
1. Clean dirt from grease fitting (A).
2. Apply 1-2 pumps of grease into fitting. DO NOT force grease.
Too much pressure will force grease past seals and cause dam-
age.
3. Wipe excess grease from around grease fitting.
1. Move stop switch to stop position.
2. Disconnect spark plug wire from spark plug.
3. Brush loose debris from blade and coat both sides of blade
with the 50-50 cleaning mixture.
4. Allow cleaning mixture to soften the remaining gummy resi-
due then wipe it from the blade.
5. Apply clean oil to the entire length of the blade. Be certain
the blade bolts are lubricated.
6. Wipe excess oil from the blade before putting the unit back in
service.