EdgeStar AP14000HS - Manual (Page 5)

On/Off
Timer Button
yard
and new batteries
,
:
Use only AAA batteries.
Remove the batteries if the remote control will not be used for a month or longerr.
Do not attempt to recharge the supplied batteries.
All batteries should be replaced at the same time; do not mix old and new batteries.
Do not dispose of the batteries in a fire, as they may explode.
Setting the Timer
If the unit is on:
• Press the timer button “
• Use the “ ”and “ ” buttons to set the
time (displayed in hours).
• After the selected time elapses, the unit will
automatically shut off.
Note: the word “ON” will appear next to
“ ” on the remote LCD when setting the
timer.
If the unit is off:
• Press the timer button “
• Use the “ ” and “ ” buttons to set the
time (displayed in hours).
• Then select which mode you want the unit to
automatically start in and make the
necessary adjustments.
• After the selected time elapses, the unit will
automatically turn on.
Note: the word “OFF” will appear next to
“ ” on the remote LCD when setting the
timer.
Power Button
Fan Speed Button
Mode Button
Operation
Cooling Dehumidifying
Note:
- Do not drop the remote control.
- Do not place the remote control in a
location exposed to direct sunlight.
- The remote control should be placed
3 feet or more away from any electrical
appliances.
Battery replacement: Remove the cover on the back of the remote control and insert the
batteries with the (+) and (-) ends pointing in the correct direction.
Timer/Temperature Set Buttons
Indication symbols on LCD:
Timer is adjustable from 1 to 24 hours by
pressing either the “
Temperature Display
Water Warning
-the machine will stop running
Dehumidifying mode
Cooling mode
Fan only mode
High fan speed
Med fan speed
Low fan speed
Air Conditioner Remote Control
All key funtions can be accessed
from the remote control.
Note: Adjustments made on the
unit’s control panel may not sync
with the remote contol’s LED.
Timer Setting Display
ON OFF
The diplay on the remote control is the set
temperature.
Used for adjusting the timer and
temperature.
When “ ” or “ ” button is pressed in
cooling mode, the temperature is
adjustable from 61ºF to 89ºF.
Heating
Heating mode
” or “ ” buttons.
When “ ” or “ ” button is pressed in
heating mode, the temperature is
adjustable from 61ºF to 80ºF.
Transmitting
- automatic function
.”
.”
F°/C°
Press this button to switch the
temperature read-out between
Farenheit and Celsius
Note: Can only be toggled in
cooling and heating modes.