Maintenance information, How to identify parts of vacuum cleaner – Eureka 4710 Series User Manual
Page 4
Maintenance Information
Maintenance schedule is also located on back side of dust cup.
2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
How to Identify Parts of Vacuum Cleaner
EXT-U Belt
Brush Roll
Handle with
Power Paw
®
Handle
Hose
Dust cup latch
Lower
cord
retainer
Nested crevice
tool & extension
wand
Power switch
Handle release
Belt view window
Filter screen & filter
Dust cup
Headlight
(on some models)
Height adjustment knob
Brush roll cover
Upper cord
retainer
Hose hook
Power cord
Dusting brush
Carrying handle
& cord wrap
Hose connector
Lower cord wrap
Hose retainer
Screen
Filter
DCF 4/18
SPECIAL FEATURES
Available on some models
Duster
chamber
Self-cleaning
duster
DUST CUP – Empty after each use
FILTER DCF 4/18 – Replace within 6 months
FILTER & SCREEN – Check regularly, clean as needed
Close bottom lid
until it clicks.
Pull up latch and
remove dust cup.
Twist dust cup cover
counter-clockwise.
Grasp filter;
turn clockwise.
Remove screen and
rinse. Dry thoroughly.
Shake dust off filter.
Rinse; dry thoroughly.
Place screen
over filter.
Align 3 tabs with cover;
turn counter-clockwise.
Remove filter.
Place screen over
new filter and install.
Line up cover
and lock.
Lift lever to release
bottom lid. Debris will empty.
BRUSH ROLL – Clean monthly
EXT-U BELT – Replace worn, cut or out of shape belt