Electrolux LAVAMAT 74850 B - Manual (Page 41)

4. Unscrew and remove the two large rear bolts B
and the six smaller bolts C.
5. Remove the bracket D and refit the six smaller
bolts C. Slide out the relevant plastic spacer E.
6. Open the porthole, take out the inlet hose from
the drum and remove the polystyrene block fitted on
the door seal.
7. Fill the smaller upper hole and the two large ones
with the corresponding plastic plug caps supplied in
the bag containing the instruction booklet.
8. Connect the water inlet hose as described under the
paragraph «Water inlet».
All the different plug caps are supplied with the
appliance in the plastic bag containing the instruction
booklet.
41 Installation
C
C
B
D
HEC0003
B
C
C
HEC0023
E
HEC0010
HEC0005
132963810_EN.qxd 06/06/2008 11.46 Pagina 41