Electrolux LAVAMAT 74850 B - Manual (Page 19)

19 Use
● Press button 7 : the machine starts its hourly countdown. The programme will
start after the selected delay has expired.
Cancelling the delayed start after having started the programme:
● set the washing machine to PAUSE by pressing the button 7 ;
● press the button 8 until the symbol 0’ is displayed;
● press the button 7 again to start the programme.
The button 8 cannot be selected with DRAIN programme .
Altering an option or a running programme
It is possible to change a few options before the programme carries them out.
Before you make any change, you must pause the washing machine by pressing
the button
7 .
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to OFF and then to the new programme position. Start
the new programme by depressing the button
7 again. The washing water in the
tub will be not emptied out.
Interrupting a programme
Press the button 7 to interrupt a programme which is running, the
corresponding light starts blinking. Press the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to OFF to cancel a programme which is running. You can
now select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 7 .
● if the DOOR symbol disappears, the door can be opened.
● if the DOOR remains lit, it means that the machine is already heating or that
the water level is too high. In this case the door cannot be opened.
● If you cannot open the door but you need to open it, you have to switch the
machine off by turning the selector dial to OFF. After a few minutes the door
can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme again and to press
button
7 .
132963810_EN.qxd 06/06/2008 11.46 Pagina 19