Emerson Radio HD9971 - Manual (Page 14)

13
CONNECTION TO AN EXTERNAL AUDIO SYSTEM
You can connect this CD player to a home stereo system, receiver, amplifier, or
recorder if desired. Connect the LINE OUT jack of this CD player to the Left/Right
Auxiliary Inputs, Line Inputs, or Record Inputs of the external device. The connection
cable is NOT included. Set the DBBS(Bass Boost) switch of this CD player to the
“OFF” position. Be sure to follow the external source connection instructions for
the other equipment as well.
HOLD SWITCH
1.) If you are carrying the unit in a backpack, school bag etc, you can slide the
HOLD switch to the ‘ON’ position. This prevents the unit from starting
accidentally and draining the batteries.
2.) Set to ‘OFF’ position to resume normal operation.
DBBS SWITCH
1.) This switch enhances the low frequency (BASS)
response.
2.) Set the VOLUME control to a low listening level before activating the DBBS
switch, then adjust to your preference.
HD9971_ib_drafts.p65 19/4/2002, 16:59 13