Electrolux 54850 S - Manual (Page 10)

Deactivation/activation of the 3 in 1 function
(The dishwasher must be switched off)
1.Press the On/Off button. The On/Off indicator light illuminates
(setting mode).
If other indicator lights are on, this means that a wash programme
has been selected. The programme must be cancelled: press
simultaneously the function buttons 2 and 3 for about 2 seconds.
All the indicator lights will turn off (except for the On/Off
indicator light and eventually salt and rinse aid indicator lights)
indicating that the set programme has been cancelled and the
machine is now in setting mode.
2.Press simultaneously function buttons 2 and 3, until the indicator
lights of the function push buttons 1, 2, 3 and 4 start flashing.
3.Press the function push button 4, the indicator lights of function
push buttons 1, 2 and 3 turn off while the indicator light of the
function push button 4 goes on flashing.
4.Press the function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the 3 in 1 funcion is active.
To deactivate the function press the function button 4 again,
the indicator light turns off.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
Operating instructions
10
3 in1 function active indicator light on
3 in 1 function not active indicator light off