EAW DX810 User Manual

Page 17

DX810 –

Note: When changing presets, the faders

change position quickly on-screen, but the audio
actually ramps according to the Ramp Time setting.

Set Powerup Preset

Select this to open the Powerup Preset Selection
window. When None (last state) is selected, the
DX810 returns to its state when it was last turned
off. Click in the Select Powerup Preset box and
drag up or down to select one of the 24 presets to
load on powerup.

Set Global Faders
Select this to open the Global Output Faders
window. Click in the Output Faders are stored: box
to choose whether the output fader settings are
saved with each preset, or the output fader settings
are global and remain at their current settings
regardless of the preset selected.

Windows

About

This provides information about the DX–810–PC
software application, including the version and
personnel credits.

Close Window (Esc)

This closes the window that is currently selected
(front-most) on-screen.

Close All (Ctrl+/)

This closes sub-windows that are currently open on
the screen, leaving just the main window open.

Combine

This toggles the Combine view with the Crosspoint
Matrix view. It duplicates the function of the
Combine button in the Button Section.

Input EQ

This toggles the Input EQ window open and closed.
It duplicates the function of the Input EQ button in
the Button Section.