Srm s, Pas c – Echo CULTIVATOR PRO ATTACHMENT 99944200513 User Manual
Page 7
SRM S
plit
B
ooM
/pAS C
ultivAtoR
A
ttAChMent
o
peRAtoR
'
S
M
AnuAl
7
d
esCrIpTIon
Locate this safety decal on your unit. Make sure the decal is legible and that you understand and follow the instructions.
If the decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instructions for
specific information.
1
2
3
4
5
4
6
7
1. DRIVE ShAfT ASSEMBLy - Contains a specially designed liner and the flexible drive shaft.
2. ShIELD - Attached to deflect debris away from operator and reduce accidental contact with tines.
3. hUB - Separately attached to axle ends by clevis pin and spring pin. Tines bolt to hubs.
4. TINES - Identical on right and left side from operator's position. See page 12 for optional settings.
5. GREASE ACCESS BOLT - Apply grease to gear housing every 25 hours of use.
6. GEAR hOUSING - Houses gears and ball bearings for driving tines.
7. SERIAL NUMBER LABEL - Also serves as insertion line when drive shaft is properly engaged.