Detergents and additives, Technical specifications, Installation – Electrolux EWT 9120 W User Manual
Page 8
Problems
Causes
The “Start/Pause” push-
button
1)
flashes red
2)
:
• the lid is not closed properly,
• the object trap is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed to high (see "Installation" section),
• the drainage pump is blocked,
• the standpipes blocked,
• the water tap is closed, the water supply has been cut off.
1) On some models, the auditable signals can sound
2) After solving any problems, press "Start/Pause" pushbutton to restart the interrupted programme.
Detergents and Additives
Only use detergents and additives designed for
use in a washing machine. We do not recommend
mixing different types of detergents. This may spoil
the washing. There are no restrictions on the use
of powder detergents. Liquid detergents must not
be used when a prewash has been selected. For
cycles without prewash, they must be added via
means of a dosing ball. Detergent tablets or doses
must be placed in the detergent compartment of
your appliance's dispenser box.
Technical Specifications
DIMENSIONS
Height
Width
Depth
850 mm
400 mm
600 mm
LINE VOLTAGE /FREQUENCY
POWER CONSUMPTION
230 V / 50 Hz
2300 W
WATER PRESSURE
Minimum
Maximum
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
Connection to water supply
Type 20/27
Installation
Remove all protective packaging for transit before
using for the first time. Keep in case needed for
future transit: Transporting a non-secured appli-
ance may damage internal components and cause
leakages and malfunctions. The appliance can al-
so be damaged through physical contact.
Unpacking
1
2
3
4
8 electrolux