Eagle Electronics 500C - Manual (Page 141)

133
2. Press
↓ to select route name|
ENT | ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C
ANCEL
N
AVIGATION
| ENT |
← to
Y
ES
| ENT .
The following figures show what the Navigation Page and Map Page
look like while navigating a route.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to select route name|
ENT |
→ to
R
EVERSE
R
OUTE
| ENT |
← to
N AVIGATE R OUTE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT |
← to
Y ES
| ENT .
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the northeast.
Figure 2. Figure 1.