Epson PERFECTION 2480 - Manual (Page 5)

Epson Perfection 2480 Photo
6/04 Epson Perfection 2480 Photo - 5
Start Light
The scanner’s ] Start light indicates the scanner status.
Transporting the Scanner
Before transporting the scanner for a long distance or storing it
for an extended period of time, you need to lock the scanner’s
carriage to prevent damage.
1. Plug in the scanner, connect it to your computer, and wait
until the carriage moves to the home position (position
nearest the buttons). While the
] Start light is green,
unplug the scanner.
2. If the cover cable is attached, disconnect it.
3. To lock the transportation lock, lift the scanner and slide
the lock to the locked position. This secures the carriage.
Caution: Do not turn the scanner over; this may damage it.
4. Attach the protective materials and repack the scanner in its
original box.
Related Documentation
CPD-17962 Epson Perfection 2480/2580 Photo
Start Here sheet
CPD-17964 Epson Perfection 2480/2580 Photo
Scanner Software CD-ROM
CPD-17965 Epson Perfection 2480/2580 Photo
Notices booklet
— Epson Perfection 2480/2580 Photo
Reference Guide (HTML)
] Start light Scanner status
Flashing green Warming up or scanning.
Green Ready to scan.
Flashing red Make sure the transportation lock is unlocked.
Try restarting your computer and unplugging the
scanner. Wait 10 seconds, then plug the scanner
back in.
Off Make sure your scanner is connected to your
computer and plugged into a power source.